Camera Accessories
Click on a link below to purchase one of these items, or get up-to-date prices.

EW 112 P G2 Body Pack Transmitter, Receiver and Omni Lavalier Microphone

EW 112 P G2 Body Pack Transmitter, Receiver and Omni Lavalier Microphone

Features: Autoscan on all receivers for simple and secure frequency selection 1440 frequencies within a 36MHz switching bandwidth for greater tuning flexibility Robust metal construction for durability Compact bodypack transmitters and receivers(30% smaller than current EW) Pilot tone squelch (defeatable for backwards compatibility with original EW systems) New battery concept (AA cells and rechargeable battery accessories) Transmitter battery status telemetry on all models Audio signal metering on transmitter LCD display External charging contacts on 300 and 500 series bodypacks XLR jacks on all rack-mountable units


EK100G2 Camera Mount Receiver

EK100G2 Camera Mount Receiver

Portable, camera-mounted receiver for use with SK100G2 bodypack transmitter.


10HT UHF Wireless Microphone/Transmitter

10HT UHF Wireless Microphone/Transmitter

A new UHF handheld microphone - the 10HT is designed to work seamlessly with the on-camera 100UPR receiver. The new mic features Azden's special surface coating to reduce handling noise. Using an electret-condenser unidirectional element, the 10HT is designed with low-noise PLL circuitry to allow the user to select any one of 63 UHF channels to assure interference free reception in the 794-806MHz range. The new microphone uses two commonly available alkaline "AA" batteries to operate for better than 8 hours. The 10HT is 230mm (9") long and 44mm (1.73") in diameter. Frequency Range: UHF 63 channel selectable (793.750 - 805.875MHz) Oscillator: PLL synthesized RF Power: 10mW Frequency Response: 50Hz - 12kHz Max. Deviation: +/- 75kHz @ 1kHz modulation, Mic input - 11dBm S/N Ratio: better than 70dB "A" weighted Audio Distortion: less than 1% @ 1kHz Mic Element: ECM Mic Sensitivity: +/- 5kHz @ -46dBm (0dBm +0.775V) Operating Temp.: 0 - 50 C (32 - 122 F) Power Requirement: 2 "AA" Alkaline batteries (2x 1.5VDC) Battery Life: 8-10 hours w/Alkaline batteries Dimensions: 230H x 44 mm (9.05 x 1.73") Weight: approx. 130g w/batteries (4.58 oz) Shipping weight 1 lb.


Artes Boom System With Tripod, Dolly and Pan/Tilt System

Artes Boom System With Tripod, Dolly and Pan/Tilt System

Video boom package includes: Artes Video Boom TVBM-132 Video Tripod TVBM-114 Dolly MPT-9 Mechanical Pan & Tilt Unit Artes Tilt Unit The Artes is the perfect solution for weddings, corporate presentations and product shots. The modular design allows for easy storage, transport and assembly. The Artes can be assembled and configured to three additional set-ups, so it can be customized to a specific job or shooting space without affecting stability or performance. A tilt platform is included, with holes for 1/4" and 3/8" studs. The Artes weight system accepts standard barbell weights (not included), which can be fine tuned with the included small weights. The central rotation platform has a low friction bearing system with a rotation brake, and is compatible with all 75mm and 100mm video tripod bowls.


542ART Roadrunner Pro Video Tripod With 519 Pro Video Head

542ART Roadrunner Pro Video Tripod With 519 Pro Video Head

Includes: 542ART Carbon Fiber Pro Video Tripod, 519 Pro Video Head and MBAG100P Padded Bag. Tripod Details: Use of carbon fiber tubing makes this two-stage video tripod one of the lightest in its class. The 542 uses Manfrotto's patented A.R.T. (Advanced Release Technology) mechanism for the fastest opening, positioning, and closing of any video tripod - ideal for news crews filming under pressure. Complete with all of the features and practical innovations that made the Manfrotto 540ART tripod among the most popular video tripods in the world, the carbon fiber 542ART offers the added benefit of a unique "squid" spreader that delivers even more flexibility for shooting in tight spaces. This squid spreader offers improved anti-torsion resistance and keeps the legs locked safely in position even in situations where space is at a premium and the tripod's footprint is smaller than usual. Unlike most other spreaders, the squid allows the user to fine tune the spreader brace angle to suit virtually any working position. Another feature is the double stainless steel spiked feet which provides unmatched traction on uneven terrain or at odd angles. For shoots on smooth floors or surfaces, these new tripods also offer pull on/off rubber feet which can be quickly and easily installed. The 542ART comes with a 75mm-100mm bowl adapter for compatibility with all industry-standard half-ball video heads. The A.R.T., or Advanced Release Technology, also allows it to be opened and locked into position as soon as the legs have been spread without any hand-operated buttons or levers. This technology is based on the movement of the mid-level spreader during the opening and closing of the tripod, and operates the locking devices of the top and bottom leg sections.


V-5 Telescopic Tilt Boom With Tripod

V-5 Telescopic Tilt Boom With Tripod

Kit includes: V-5 Telescopic DV Boom TVBM-132 Video Tripod 132 XN The V5 lightweight telescopic DV boom is designed to carry a maximum load of 6.6 lbs. (3kg) (camera incl. accessories) and has a standard mechanical tilt option (+/- 60 degrees). The boom is especially made for quick set-up and is very light 12.13 lbs. (5.5kg) with a compact packed size 46 x 8.7 x 6.3" (117 x 22 x 16cm). The V5 boom has an extension range from 53 to 108.25" (135 to 275cm) from tripod to boom end. The boom tail uses standard fitness weights (not included) and slides into the main boom section for either counterweight adjustment or packing. The weight bar, including weights, can be taken from the tail (one knob) for an even more compact travelling size. The V5 has a vertical set-up as a standard feature for extremely compact operation when you don't have room for the conventional set-up. The handle, used for the tilt movement,is adjustable to fit the users need. It can be fixed to keep the camera level or in the same angle throughout the vertical boom movement. The length of the steering cable is easily adjustable to fit the telescopic set-up of the boom. It rolls on to a wheel next to the steering handle. Note: Counterweights NOT included. Manfrotto Video Tripod 132 XN with 100mm Bowl The ideal studio location tripod that can support cameras up to 30kg/66lbs! The leg spread is fully adjustable but also incorporates a single position, 30 angle leg-lock which provides the best of both worlds. The built-in claw ball levels your camera quickly, even under the most uneven conditions. Built-in chain brace is standard.


Artes Boom Kit With Tripod

Artes Boom Kit With Tripod

Kit includes: Artes TILT Video Boom TVBM-132 Video Tripod 132 XN The Artes Tilt Boom is including Tilt system, Screen holder and Extra Weight system. The Artes Video Boom System provides a steady camera platform for the starting videographer and allows for tilting of your camcorder from the rear of the boom. The system is delivered as a kit, partly mounted.After the first set-up, supported by a very clear instruction, there is only one key necessary for quick mounting and de-mounting. The boom system is modular extended and this way usable in at least three different set-ups. The central unit has four locking knobs for applying friction to the vertical boom movement and to make disassembling easier. The central rotation platform has a low friction bearing system with a rotation brake. It fits to all 75 and 100mm video tripod bowls. The Artes weight system is based on a set of of standard fitness weights (not included) with a set of (included) small fine-tuning weights. The system is expandable and mountable as side weights. Includes: Tilt System, Screen Holder and Weight system. Note: Counterweights NOT included.


351MVB2 Pro Video Aluminum Tripod With 503 Pro Video Head

351MVB2 Pro Video Aluminum Tripod With 503 Pro Video Head

The 503,351MVB2K tripod and head kit is the perfect compliment to the HDV cameras on the market. A tripod kit with a tandem leg section, mid-level spreader, a 75mm bowl topped with a smooth pro fluid video head, that all folds down to a small size due to its three leg sections. Includes 3460 tripod head, 351MVB2 Pro Video Aluminum Tripod, MBAG90P, Mid-Level Spreader and Spiked Foot Shoes.


CAN HC3200 CANON HC3200 System Case for XL2 MiniDV

 

iconicon

A system case that is designed specifically for the Canon XL2 MiniDV Camcorder

AUDIO TECHNICA ATR288W Wireless Microphone System icon

iconicon

 

VHF / Wireless mic system

  • Includes the ATR20 Handheld MIC & the ATR35 Lavalier mic, Receiver & transmitter
  • 2 switchable frequencies
  • 100-300 ft. range
DAS PROVISTAW3 DAVIS & SANFORD ProVista W3 ProVista 12 Tripod Kit icon

iconicon

Includes Tripod - F12 Fluid Head - W3 Deluxe Dolly - Padded Tripod Bag / For serious camera users / Works with Film & Digital Camera and Camcorder

Matte Black Cinefoil 12" x 50'

CAMERAS
DIGITAL, HD, DVCAM, MINI-DV, BETA®, VHS-C, DIGITAL 8® & 8MM TAPE
COMPUTERS AND DIGITAL EDITING SOFTWARE.

 
 WEDDING PACKAGES

WEDDINGS
 PHOTOS TO VIDEO/DVD
PHOTO MONTAGES
BIRTHDAY VIDEOS
VIDEOS TO DVD
MEMORIALS
GET A QUOTE
PROJECTOR & SCREEN RENTAL
FILM TO DVD/VIDEO
QUINCEANERAS
VIDEO EDITING
HOURLY RATES
SAMPLE VIDEOS
THE REHEARSAL DINNER
CAMERA SALES
BRIDAL REGISTRIES
RECITALS
BRIDAL MALL
WEDDING SONGS
ANNIVERSARY VIDEO
CLASS REUNIONS
FAMILY REUNION
FASHION SHOWS
HOME

 All prices are subject to change without notice.

 

 

 Professional Wedding Videos